Standard IIC I2C TB6612 Stepper Motor PCA9685 PWM Servo Driver Shield V2

Standard IIC I2C TB6612 Mosfet Stepper Motor PCA9685 PWM Servo Driver Shield V2 for Uno Mega R3 Replace L293D
Descriptions:
The original Motorshield kit is one of our most beloved kits, which is why we decided to make something even better. We have upgraded the shield kit to make the best, easiest way to drive DC and Stepper motors. This shield will make quick work of your next robotics project! We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements:

Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.

Instead of using a latch and the PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it\'s I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any, such as the Uno, Due, Leonardo and Mega R3.

Completely stackable design: 5 address-select pins means up to 32 stackable shields: that\'s 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project.

Lots of other little improvements such as a polarity protection FET on the power pins and a bit of prototyping area. And the shield is assembled and tested here so all you have to do is solder on straight or stacking headers and the terminal blocks.

2 connections for 5V \'hobby\' servos connected to the high-resolution dedicated timer – no jitter!
4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
Motors automatically disabled on power-up
Big terminal block connectors to easily hook up wires (18-26AWG) and power
Reset button brought up top
Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
Tested compatible with UNO, Leonardo, ADK/Mega R3, Due, Diecimila & Duemilanove. Works with Mega/ADK R2 and earlier with 2 wire jumpers.

Specifications:
Packing size: 120mm*95mm*20mm/4.72*3.74*0.79\"
Package weight: 24g

Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools. 
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.

Package Content:

1 x Stepper Motor Driver Shield