Digital Touch Screen Thermometer Hygrometer Electronic LCD Temperature Humidity Meter Weather Station Indoor Outdoor Clock
MODE touch key:
1.Press the MODE key once a switch clock or set the alarm clock time interface, the two cycles switch (two dots do not flicker, and the "AL" symbol is the alarm clock time interface).
2.Time display state, press MODE 2 seconds to enter time settings, set points, hours, 12/24 hours mode, year, month, day. During the period of digital flashing, press ADJ to adjust (the adjustment can only cycle forward), after the completion of a set, then press the MODE key, and naturally enter the next setting. If there is no keystroke operation at 1 minutes, the interface will automatically exit.
3.Alarm clock setting (AL) display state, press MODE 2 seconds to enter alarm clock time setting, operation mode and time set one to.
ADJ touch key:
1.Press ADJ key when setting time, date and alarm function, so that data can be quickly increased.
2.When the alarm clock time is displayed, press ADJ to adjust the alarm switch state once. (when the alarm function is turned on, there is a bell icon above the time and no one closes when it is turned off.)
3.When the alarm clock shows the state, press ADJ two times to adjust the time switch state of the whole point (when the whole time function opens, the signal icon is displayed on the top of the time, and the closing time is not).
4.When the alarm clock shows the state, the alarm clock and the whole time function (two functional icons are displayed at the same time, while the closing time is closed) under the ADJ three times.
MAX/MIN touch key:
The MAX/MIN key is pressed once to show the highest indoor temperature and humidity during the MAX- measurement; then the MAX/MIN key is pressed once to show the lowest indoor temperature and humidity during the MIN- measurement.
LIGHT touch key:
Press the noctilucent light for 15 seconds and press it once again to shut down immediately.
℃ / ℉ key: conversion centigrade or Fahrenheit display.
Comfortable display at temperatures between 20℃~26℃ and humidity 50%RH to 70%.
At any temperature, humidity is higher than 70%, indicating moisture.
Drying at any temperature with humidity below 50%.
Matters needing attention:
1. The font is blurred, but the battery is not enough, and new batteries need to be replaced.
2. After reinstalling the battery, the final high / low temperature humidity memory is cleared.
3. Please do not fall or strike, easy to cause failure.
1 x Thermometer