3D Printer 5.5 Inch LS055R1SX03 Module Display+HDMI to MIPI Driver Board

5.5 Inch LS055R1SX03 LCD Module Screen Display+HDMI to MIPI Driver Controller Board for 3D Printer
Specifications:
Module size: 70.94mm * 128.26mm * 1.35mm (excluding I/F-FPC and electronic components)
Effective area size: 68.04mm * 120.96 mm
Pixel spacing: 0.04725mm x 0.04725 mm (538ppi)
Resolution: 1440 * 2560
Color pixel arrangement: RGB vertical stripes
Display mode: transmission mode, constant black mode, in-plane switching mode.
Number of colors: 16,777,216 colors
Backlight: light emitting diode (LED), 14LED is 2 parallel, 7 series connection
Backlight current: 20mA / LED (typical value)
Supply voltage: AVDD = 5.5 + / – 0.1V AVEE = -5.5 + / – 0.1V
Interface I/O power note (1): VDDI = 1.8 = / 0.1V must provide VVDI with the same voltage as the "H" level of the customer interface signal
LCD driver IC: (power and power IC:Renesas SP Driver Inc.)
Interface: MIPI_DSI video mode (4-Lan x2-port)
Inversion method: column inversion
Surface treatment: HC- polarizer (hardness: 3H)

Package size: 230*180*30mm/9.05*7.08*1.18''

Type: A( LCD Module Screen Display),B(HDMI to MIPI Driver Board),C(Display+HDMI to MIPI Driver Board)

Warm Tips:
1. You can easily remove backlight to build 3D printers or video projectors and DIY projectors!
2.
The refresh rate is 50HZ – 60HZ. We usually send 50HZ. If you need a
refresh rate of 60HZ. Please comment and make sure your computer
supports 60Hz.
3. For data list and any questions, please do not hesitate to contact us.

Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.

Package Content:

1 x LS055R1SX03 LCD Module Screen Display
1 x LS055R1SX03 Driver Controller Board